Okay so I'm curious would a double sided usb cable work as a hdd for the wii if its plugged into a computer and the usb for the wii? We used to have one and used it for direct transfer from one computer to the laptop and it didn't need any special program once plugged together they would pop up under my computer on both computers so would it work for a external hdd for my backups?
↧
USB to USB wii
↧
USB Loader issue after in game update **newbie**
Hey there,
I'm sorry if this is in the wrong section and I have looked through the forum but can't seem to find the answer I'm looking for.
Basically I am new to soft modding and new to the wii. I managed to soft mod my console and have used USB loader to back up my discs to my hard drive. All was working well until my wife updated a game yesterday without me knowing. (To be fair I wasn't aware that in game updates would wipe the mod) ever since when I try to use USB loader it gets to the loading screen and then goes black. After I get a screen full of writing (dump etc). Am I correct in saying this has erased my soft mod? If that's right how much do I have to do to get it all back?
Do I need to download letter bomb again or do I just need to go through the setup and install? Your help would be greatly appreciated. Please give me the idiots guide to getting it back too as I'm pretty fresh to this scene.
Look forward to your reply's
Thanks
I'm sorry if this is in the wrong section and I have looked through the forum but can't seem to find the answer I'm looking for.
Basically I am new to soft modding and new to the wii. I managed to soft mod my console and have used USB loader to back up my discs to my hard drive. All was working well until my wife updated a game yesterday without me knowing. (To be fair I wasn't aware that in game updates would wipe the mod) ever since when I try to use USB loader it gets to the loading screen and then goes black. After I get a screen full of writing (dump etc). Am I correct in saying this has erased my soft mod? If that's right how much do I have to do to get it all back?
Do I need to download letter bomb again or do I just need to go through the setup and install? Your help would be greatly appreciated. Please give me the idiots guide to getting it back too as I'm pretty fresh to this scene.
Look forward to your reply's
Thanks
↧
↧
Help
I got my Wii back in 2008 im sure it reads burned dvd-rs
Then my wii got formatted so now I rehacked it downloaded NeoGamma and all that
When I put in my burned DVD-R disc of zelda via neogamma,
It shows the whole safety screen and then it shows a loading sign and than it says "Sorry we cannot read you disc please check the wii instructionmanual"
Then when i take out the disc it says "please enter
Then my wii got formatted so now I rehacked it downloaded NeoGamma and all that
When I put in my burned DVD-R disc of zelda via neogamma,
It shows the whole safety screen and then it shows a loading sign and than it says "Sorry we cannot read you disc please check the wii instructionmanual"
Then when i take out the disc it says "please enter
↧
Questions for burning DVD file disc for WiiMC
Hello,
I have been scouring the everywhere for about almost 2 weeks now for answers what I am trying to do. Please forgive me if the answers were right in my face. I am only asking because I haven't been able to do what I am trying to do.
I have recently surprised my little sister by soft-modding her Wii so we both can enjoy the games of my childhood and now I want to know if it is possible to use WiiMC to play AVI files (or any other non-DVD files) off of a DVD-R? I have tried to using IMGBurn, but I received error message after error message when trying to get them to play on her Wii. I have had success playing, as a test, my menu-stripped backup copies of my movies with no problem. But, I would like to know if this is possible, is there a tutorial I have missed that I can read to know what settings I should be using, and does a file DVD have to be DVD-R (I want to know that before I go out to buy more DVD-Rs.)?
Any help and/or tips on what I might be doing wrong with my burning. Thank you.
I have been scouring the everywhere for about almost 2 weeks now for answers what I am trying to do. Please forgive me if the answers were right in my face. I am only asking because I haven't been able to do what I am trying to do.
I have recently surprised my little sister by soft-modding her Wii so we both can enjoy the games of my childhood and now I want to know if it is possible to use WiiMC to play AVI files (or any other non-DVD files) off of a DVD-R? I have tried to using IMGBurn, but I received error message after error message when trying to get them to play on her Wii. I have had success playing, as a test, my menu-stripped backup copies of my movies with no problem. But, I would like to know if this is possible, is there a tutorial I have missed that I can read to know what settings I should be using, and does a file DVD have to be DVD-R (I want to know that before I go out to buy more DVD-Rs.)?
Any help and/or tips on what I might be doing wrong with my burning. Thank you.
↧
Wii reads old backups, but will not read new ones
Hello, i am not new to the modding scene however i recently came into another wii and just softmodded it yesterday. I have done this many time before but have run into a problem that is baffling the hell outta me. Okay ill start by saying, i have done everything correct in the softmod any wii guide.
I have HB installed all the cIOS', i have installed darkcorps so i can read backups from the disk channel. I will and have always used dvd+r's even though its recommended to use -r's, however i havent ever run into a problem, and know this has nothing to do with my current situation.
Also dont give me the "go and get a HDD and use usbloader" cuz that has nothing to do with my question, and if i wanted to do that i would. Now for my question. I cannot seem to get any of the newly burned games i am backing up to read in neogamma, wiiflow, or the disk channel. Have burned two backups of skyward sword, and one backup of FF:CC The crystal bearers, and i get the unable to read disk in the channel, in neogamma get the bad burn or dl error and the drive to new for dvd-r's (this IS NOT a wii manufactured after 2009 and i know it reads backups.)
The reason i know it WILL read backups is i have resident evil 4 wii edition that i used with the previous wii i had, when i put that in, it reads no prob. The gamecube games as well as the old backups i have work in the disk channel and neogamma. So i am wondering at possible solutions and if anyone may know what the problem may be. Old backups work (wii and GC) new backups wont.
I am burning at the slowest speed im able to burn at, the disk dumps are verified and clean. Is it possible that the dvd burner im using is the problem? The old backups i burned on my samsung chrono series 7 laptop, and these im burning on my desktop with a memorex lightscribe dvd-rw @ 8x speed, and thats really the only thing i can think of.
With these games being fairly new (i think) are their any IOS's that i may need or something im missing?? i dont get why some backups would work, while others dont. Except for the details that have changed in my method of burning, which are the type of burner. Any help would be appreciated. Im tired of wasting my dvds
I have HB installed all the cIOS', i have installed darkcorps so i can read backups from the disk channel. I will and have always used dvd+r's even though its recommended to use -r's, however i havent ever run into a problem, and know this has nothing to do with my current situation.
Also dont give me the "go and get a HDD and use usbloader" cuz that has nothing to do with my question, and if i wanted to do that i would. Now for my question. I cannot seem to get any of the newly burned games i am backing up to read in neogamma, wiiflow, or the disk channel. Have burned two backups of skyward sword, and one backup of FF:CC The crystal bearers, and i get the unable to read disk in the channel, in neogamma get the bad burn or dl error and the drive to new for dvd-r's (this IS NOT a wii manufactured after 2009 and i know it reads backups.)
The reason i know it WILL read backups is i have resident evil 4 wii edition that i used with the previous wii i had, when i put that in, it reads no prob. The gamecube games as well as the old backups i have work in the disk channel and neogamma. So i am wondering at possible solutions and if anyone may know what the problem may be. Old backups work (wii and GC) new backups wont.
I am burning at the slowest speed im able to burn at, the disk dumps are verified and clean. Is it possible that the dvd burner im using is the problem? The old backups i burned on my samsung chrono series 7 laptop, and these im burning on my desktop with a memorex lightscribe dvd-rw @ 8x speed, and thats really the only thing i can think of.
With these games being fairly new (i think) are their any IOS's that i may need or something im missing?? i dont get why some backups would work, while others dont. Except for the details that have changed in my method of burning, which are the type of burner. Any help would be appreciated. Im tired of wasting my dvds
↧
↧
Wii game stack dump error
Hi there,
i have softmodded 4.1e wii and wd usb hard drive. I use wiiflow and all games work flawlessly till I have
tried to play backup of transformers prime.
the game will not play, I just get black screen with dsi acurd stack dump error and lots of codes.
i have tried about 6 different backups of this game on usb hard drive and I get the same error with all.
i have done the delete metaini and still the same errors.
any help would be great ;)
i have softmodded 4.1e wii and wd usb hard drive. I use wiiflow and all games work flawlessly till I have
tried to play backup of transformers prime.
the game will not play, I just get black screen with dsi acurd stack dump error and lots of codes.
i have tried about 6 different backups of this game on usb hard drive and I get the same error with all.
i have done the delete metaini and still the same errors.
any help would be great ;)
↧
Can iso game files be played off sd card instead of usb or burning
Hi and thanks for taking time to read this thread. I hacked my wii 4.3U downgraded to a 4.1u. I did everything good everything is working well. Ok, my problem/question has to do with iso files. i can play them with no problem. Its the files that are .rar files, I unlock them and they become an iso file. I do not have a usb stick but i do have sd cards 32,16,8,1 gb. My question is, is it possible to play these .iso files games off my sd card? without burning it to a disk or needing an usb stick?
I did try to use wbfs manager, but i had to format the same sd card that i hacked with and it just didn't work.
I did try to use wbfs manager, but i had to format the same sd card that i hacked with and it just didn't work.
↧
Will a Wii read DVDs as normal disks?
I want to play NSMBW on my Wii off of a DVD. I think that Nintendo did something to make it just read Wii disks and i have to install a channel or something to make it recognize the DVD. If I do need a channel, tell me which one; if I don't, please tell me that as well.
And if I do need a channel, would I be able to use Riivolution with the channel?
Also, I've heard that NSMBW takes up a normal CD's worth of space on the disk. Could I write it to a normal disk (they're cheaper :P) or would the Wii not read it 'cause it's not in the right format?
And if I do need a channel, would I be able to use Riivolution with the channel?
Also, I've heard that NSMBW takes up a normal CD's worth of space on the disk. Could I write it to a normal disk (they're cheaper :P) or would the Wii not read it 'cause it's not in the right format?
↧
how to burn wii WBFS File
I have a lot of wii WBFS File on my computer how do I burn them and what dvd blanks do I use ????
↧
↧
the legend of zelda skyward sword burning help
I just burn a iso of the legend of zelda skyward sword and it look like it all work good I burn some game list it and they all work good and I have on my wii neogamma release 9 beta 47 I know it old but when I try to play my game I get a green screen what do I need to do to fix this.
↧
Wiiscrubber
I've just got one question.. I used the Make Key app..it made a key..thing is.. it made 2..
key.bin
&
kkey.bin
I put key.bin into the folder as recommended & it said Unable To Open Key.bin
I put both in.. & it all worked..no problems at all.
What ? How is that ? What is kkey.bin that key.bin is not ?
WiiScrubber 1.4
/salute
key.bin
&
kkey.bin
I put key.bin into the folder as recommended & it said Unable To Open Key.bin
I put both in.. & it all worked..no problems at all.
What ? How is that ? What is kkey.bin that key.bin is not ?
WiiScrubber 1.4
/salute
↧
imgburn just gives us "read error 1101"
Hi everyone. I just brought a second hand wii for my son which has neogamma v.7 r.14 on it. It came with a lot of burnt wii games on DVD-R discs (memorex). Most work fine. BUT my son (who is 5) accidentally broke 2 games the other day by trying to stuff two in the drive... argh!
So I downloaded some wii ISOs and imgburn. I read and watched a few guides here like this one- http://www.wiihacks.com/submit-artic...y-imgburn.html and on youtube. I have tried 4 different wii Isos now (from wii isos) and burnt 8 DVD-Rs but none work.. I am using some cheap sony DVD-R 4.7 gb discs.
It says read error 1101 in neogamma when i try to run them. I really dont know what else to try now. Please help if you can. Thanks!
So I downloaded some wii ISOs and imgburn. I read and watched a few guides here like this one- http://www.wiihacks.com/submit-artic...y-imgburn.html and on youtube. I have tried 4 different wii Isos now (from wii isos) and burnt 8 DVD-Rs but none work.. I am using some cheap sony DVD-R 4.7 gb discs.
It says read error 1101 in neogamma when i try to run them. I really dont know what else to try now. Please help if you can. Thanks!
↧
NUS for mac
Hey people. So I'm trying to get my old wii 4.3 to read games that are on DVD-R. I installed NeoGamma, got the DVD + no cIOS error 0053000 and learned that I will have to change the cIOS to base 56. I read that normally in my situation, one would get NUS Downloader, but there doesn't seem to be anything available for Mac, and of course now wii can't even connect to wifi since last month's discontinuation. Will I ever be able to play the game I have on the DVD? Can someone tell me how?! Thanks.
↧
↧